Maker Expo puts innovation at center stage
More than 400 Saudi 5-12 grade students try their hand at technologies such as robotics and 3D printing at the 2nd Maker Expo.
Fostering innovation in the Kingdom is a key part of Saudi Aramco’s strategy to become the world’s leading energy and petrochemicals company, and it is a key component of the Saudi Vision 2030 to create sustained economic growth, diversification, and job creation for future generations.
For a vision on this scale, it is important to start at the foundations, to nurture the creative spirit of innovation in the youngest generation, through the science and technology programs that cater to school-aged children around the Kingdom. This is the goal of Saudi Aramco’s Training & Development’s General Educational Partnerships Division’s (GEPD) ongoing support of a Maker Movement within the Kingdom. With a second Maker Expo in April, there are already signs that the innovative spirit is taking hold.
Out of more than 400 Saudi 5-12 grade students and educators and 600 company visitors attending the second Maker Expo, three talented young Makers used novel technologies such as robotics, Google Cardboard, and 3-D printing to solve everyday problems in creative ways.
Here are their stories:
Lego mindstorms robot pavilion
Young Samir Bakir had been a “Lego addict” from a very early age and on his 9th birthday, he took this fascination to a higher level when he received the EV3 Mindstorm kit. Mindstorm is a Lego system that allows young people to build robots and to write the computer coding that controls them.
For the Maker Expo in April, Samir decided to use the Mindstorm to create a Rubik’s Cube Solver.
“He worked on it for over four weeks in between his school homework and weekends,” his mother said. “He encountered many problems forcing him to modify the tilt arm from the original design so that the cube would not slip when being rotated.”
When the solver would not work after color scanning, Samir’s father chipped in with a suggestion to try an older version of the software. The Cube Solver worked. It was a lesson in persistence that Samir has taken to heart.
Ron Monsen, a geophysical consultant in the Upstream Continuing Excellence and Technology Planning and Development Group at Saudi Aramco, had a close-up look at Samir’s robotic Rubik’s Cube Solver and declared himself impressed.
“As an adult with a grown child I was not aware how far the old Legos my son and I played with had evolved,” Monsen said. “Samir’s project for solving the Rubik’s Cube had me mesmerized for quite a long time. Very impressive!”
Google Cardboard Virtual Reality Goggles
Students at Dhahran’s Bayan Garden School made 60 pairs of Virtual Reality (VR) goggles, using an inexpensive system called Google Cardboard.
Designed by Google engineers in France in 2014, Google Cardboard allows Makers of all ages the ability to engage with VR environments — for gaming and other applications — using smartphones, a cheap pair of plastic lenses, magnets and a cardboard box.
Similar to the groundbreaking VR system Oculus, Virtual Reality systems like Google Cardboard are giving young innovators the tools to simulate the real world through computer graphics. Computer simulation is not just for gaming. Industrial trainers use VR to give trainees the opportunity to learn real-world problem solving skills before being deployed in the field, and as the students at Bayan Garden School learn to create their own VR goggles, they are opening the door to mastering innovation in emerging technologies that may define the 21st century workplace.
SpoutBots and Camelbots
At the Maker Expo, groups of students worked together in teams to build a simple robot called a SpoutBot, consisting of switches, LEDs, toy motors, a battery pack, and resistors and requiring no soldering. The SpoutBot was designed by Khan Academy as an introduction to electronic components. When assembled, the SpoutBot would run along the ground until it ultimately hit an obstacle with its antenna. At this point, hitting an obstruction would cause a circuit to close, which activated a LED light, temporarily shutting off a motor and forcing the robot to change direction.
Bayan Gardens School (BGS) students took it one step farther. Fresh off their experience visiting MIT earlier in the spring, where they were taught to properly solder circuits, BGS students created a moving robot in the shape of a camel, called a CamelBot. Students learned the differences of the various components, such as capacitors, resisters, integrated circuits, and LEDs and how to solder these components together to make the CamelBot.
Shahad Al-Omani, Fawzeya Aldossary, and Juri A. Al-Huthali were glued to their stations during Maker Expo, explaining and guiding the participants on how to solder and make the CamelBot work. The students also learned some basic diagnostic techniques on what could be wrong if the LED does not light up; such as ensuring the LED is aligned in the correct direction with the short and long leg.
Shahad was one of the first students who eagerly arrived early at Maker Expo. Her father was proud to see his daughter confidently soldering components onto the board and then watching the Camelbot actually moving around and working when completed. Fawzeya, another veteran of the MIT soldering workshop, was thrilled to show others who were clearly impressed with what she had been able to accomplish.
الاستفسارات الإعلامية
جميع استفسارات وسائل الإعلام يتم التعامل معها من قبل إدارة الإعلام والتواصل التنفيذي في أرامكو - قسم العلاقات الإعلامية. الظهران - المملكة العربية السعودية
